1 out of 16 hot runner is a hot runner system, which applies hot runner technology to injection molding, so that the plastic can maintain a molten state during injection molding. Specifically, 1 out of 16 hot runner means that in an injection mold, there is a main hot runner, from the main hot runner branch out of 16 dispensing mouth, each dispensing mouth can independently control the flow and injection of plastic.

The advantages of 1 out 16 hot runner technology are:

Optimize plastic processing: Due to the use of hot runner technology, the plastic always maintains a molten state during the injection molding process, avoiding the problems of plastic advance hardening and blockage in the traditional cold runner, and improving the stability and efficiency of plastic processing.

Improve product quality: Because the plastic can maintain a molten state in the hot runner, it avoids problems such as unstable quality of formed products caused by uneven cooling, and improves product quality and consistency.

Reduce production costs: The use of hot runner technology can reduce the waste of polymer materials and energy, and reduce production costs. At the same time, due to the improvement of processing stability and efficiency, it can also reduce the scrap rate and further reduce production costs.

Flexible and changeable: 1 out of 16 hot runner design makes the flexibility of the mold greatly improved, according to the needs of different products, by adjusting the opening and closing of the dispenser to change the flow path of the plastic and the amount of injection, to achieve rapid mold change and multi-mold production.

1 out of 16 hot runner system A heating component system in an injection mold that injects melted plastic particles into the mold cavity. The hot runner system is composed of hot nozzle, diverter plate, temperature control box and accessories. By heating, the plastic of the runner and gate is kept in a molten state. A heating rod and a heating ring are arranged near or in the center of the runner, and the entire runner from the nozzle of the injection molding machine to the gate is in a high temperature state, so that the plastic in the runner remains molten, generally do not need to open the runner to take out the condensate after shutdown, and only need to heat the runner to the required temperature when starting up.

1 16 hot runner system is divided into fully hot runner and semi hot runner system. Because the form of hot nozzle directly determines the selection of hot runner system and the manufacture of mold, the hot runner system is often divided into open hot runner system and needle valve hot runner system accordingly.

In practical applications, 1 out of 16 hot runner technology can be widely used in the production of various plastic products, by optimizing plastic processing, improve product quality and consistency, reduce production costs, improve production efficiency and flexibility.